High-quality black wear-resistant insulating rubber mat

High-Quality Black Wear-Resistant Insulating Rubber Mat
◆ Appearance and Specifications of Insulating Rubber Mat
The depth or height of spots or uneven parts on the insulating rubber mat must not exceed the thickness tolerance of the rubber sheet. Bubbles per square meter: no more than 5 bubbles with an area less than 1 cm², with a distance of at least 40 mm between any two bubbles. The depth and length of impurities must not exceed the thickness of the rubber sheet, with a minimum distance of 40 mm. The uneven or spongy edge width must not exceed 10 mm, and the length must not exceed 1/10 of the total length of the rubber sheet. Cracks are not allowed.

◆ Structure of Insulating Rubber Mat
The insulating rubber mat should be made of rubber-based insulating materials.
◆Process and Molding of Insulating Rubber Mat
The upper and lower surfaces of the insulating mat should not have harmful irregularities. Harmful irregularities refer to defects that disrupt uniformity or damage the smooth surface profile, such as small holes, cracks, local bulges, cuts, embedded conductive foreign objects, folds, voids, uneven waves, and casting marks. Harmless irregularities refer to surface irregularities formed during the production process.
◆Thickness of Insulating Rubber Mat
Thickness measurements and inspections should be conducted at more than five randomly selected points across the entire insulating mat. A micrometer or an instrument of the same precision can be used for measurement. The micrometer's accuracy should be within 0.02 mm, with a measuring tip diameter of 6 mm and a flat pressure foot diameter of (3.17 ± 0.25) mm. The pressure foot should be able to apply a pressure of (0.83 ± 0.03) N. The insulating mat should be laid flat to ensure smooth measurements with the micrometer.
◆National Standards for Insulating Rubber Mat
For a 10KV power distribution room, choose an 8mm thick mat: withstands 10000V power frequency voltage for 1 minute without breakdown; breaks down at 18000V power frequency voltage in 20 seconds. For a 35KV power distribution room, choose a 10-12mm thick mat: withstands 15000V power frequency voltage for 1 minute without breakdown; breaks down at 26000V power frequency voltage in 20 seconds. For low-voltage power distribution rooms, choose a 5mm thick mat: withstands 3500V power frequency voltage for 1 minute without breakdown at voltages below 500V; breaks down at 10000V power frequency voltage in 20 seconds.
◆Storage of Insulating Rubber Mat
The insulating mat should be stored in a dedicated box, avoiding direct sunlight, rain, and snow, and protected from compression and sharp object impacts.
Contact with oil, acid, alkali, or other harmful substances is prohibited, and it should be kept at least 1 meter away from heat sources. The storage environment temperature should be between 10°C and 21°C.

Features of Five-Star Insulating Rubber Mat

▶ Physical Properties: Hardness 55-70 degrees, tensile strength ≥ 3 MPa, elongation at break ≥ 300%, water absorption ≤ 1.5%.
▶ Basic Properties: Smooth surface, excellent electrical insulation performance, suitable for auxiliary protection of electrical equipment, generator rooms, operation workshops, power distribution rooms, and other locations. Our company's insulating rubber mats are EU-certified, making us the only manufacturer in the country that meets EU standards. We can produce insulating rubber mats with a maximum insulation voltage level of 100,000 volts.
★★★★ Hebei Five-Star Power Equipment Co., Ltd. is a supplier of insulating rubber mats in the Hebei region. With years of accumulated production experience, our insulating rubber mats are made from virgin rubber, free from recycled or inferior rubber, without any pungent odor. They offer excellent insulation performance, reliable quality, and long service life. As a direct manufacturer, we provide more competitive prices!!